APRIL 7, 2010, SAN DIEGO, CA – Members of the Structural Engineers Association of
California (www.seaoc.org), the premier professional organization of practicing
structural engineers in the State, are urging homeowners to bolt their home’s foundations
and take other measures to protect their property following the magnitude 7.2 earthquake
which struck on April 4, Easter Sunday, in Baja California.
According to SEAOC’s Jim Amundson, head of the association’s PR committee, “If California
residents would follow some simple basic steps today to prepare for such earthquakes, they will
be better able to avoid damage to their homes, families and belongings that could occur if a
similar quake hit closer to their region.”
“The good news is that basic earthquake problems in most houses, both structural and
nonstructural, can be remedied in a majority of cases through easy and inexpensive means,” said
Specifically, the Structural Engineers Association believe that homeowners need primarily to
answer four basic questions before the next earthquake in their area:
1. Is my house securely anchored to its foundation so that it won’t slip during an
2. Are there exterior hazards such as loose chimneys that need attention?
3. Are there interior hazards such as loose water heaters and unsecured furniture that create
a safety hazard for my family?
4. Do I need the opinion and advice of a professional engineer and where do I find the right
Foundations Are the Number One Issue
Wood-framed houses that are not adequately anchored or bolted to their foundations and/or have
un-braced cripple walls in the crawl space are in danger of sliding off their foundations during an
earthquake, severely damaging or destroying the building.
Unbolted foundations: Adding bolts to connect unsecured wood-framed houses to their
foundation is one of the most important steps toward earthquake safety. This can be done by a,
contractor, or anyone skilled at home maintenance. If you, the homeowner, are not sure whether
the foundation is bolted already, you should look for bolts at the base of the stud wall where the
wood mudsills sit directly on top of the concrete foundation. Such bolts should be no more than 6
feet (1.8 meters) apart in a single story and 4 feet (1.2 meters) apart in a multistory building.
If your home’s first floor crawl space foundation has been damaged in the past or it was built in
the “pier and post” style, it may be necessary to consult a licensed contractor or civil / structural
engineer about replacing it with a continuous perimeter foundation.
Un-braced cripple walls. If your wood-framed home has a crawl space beneath the first floor, the
individual short studs supporting the first floor, called “cripple” studs, should be sheathed
together with plywood panels to make a sturdier wall. You or a licensed contractor can
strengthen the cripple walls relatively inexpensively.
Soft first stories. Many two-story homes in earthquake-prone areas of California have large
garage door openings or other large open window spaces in their first floors walls. When the
home is not designed correctly, structural engineers call these “soft stories.” Some hillside homes
built on stilts also have perilous foundations. In cases of soft first stories and raised foundations,
it’s advisable to consult a licensed professional architect, contractor or civil/structural engineer to
make sure your building is adequately braced.
Exterior Hazards Need Your Attention
Un-reinforced masonry. In some parts of California, many homes have been built with brick or
block exterior walls with little or no reinforcing steel. These homes need to be reinforced. Some
communities have programs for retrofitting un-reinforced masonry buildings so check with your
local building office. One solution to this problem is to add an internal steel frame and bolt the
walls to the steel frame. Even in wood-framed homes, inadequately braced brick chimneys can
also be a problem. It’s important, therefore, to consult an expert to determine if your home’s
exterior brick walls and chimney structures are safe.
Interior Hazards Are Easily Remedied
Nonstructural deficiencies. Inside one’s home lurks many potential hazards such as an
un-braced water heater, exposed brick walls, open shelves, tall furniture and unsecured
mirrors and other wall hangings. If not properly secured, these items could themselves
break during an earthquake, but more importantly they could cause severe injury to your
family members if they topple. Fortunately, most of these problems can be mitigated (or
protected against failing during an earthquake) with the use of simple metal clips and
straps that can be purchased at a local hardware store, to secure items in place.
Locating a Professional for Advice
Civil engineers, structural engineers and architects are trained and licensed to provide
information about structures. Geologists, foundation engineers, and geotechnical engineers are
trained and licensed to evaluate the soil conditions the structures sit on and recommend
Make sure that you select the right expert and choose someone whom you can trust. This
individual will be reviewing your problem, providing plans and a scope of work as a remedy. A
good place to start is to call a professional organization such as SEAOC and ask for information
about individuals who work in your area and handle the kind of problem you have.
For more information about these and other steps homeowners can take, there are many available
resources online. SEAOC, in fact, participated in the development of two brochures on
earthquake safety called “Putting Down Roots in Earthquake Country.” One concentrates on
Southern California earthquake issues and the other on Northern California earthquake issues.
They can be found at www.earthquakecountry.info/roots. SEAOC also has its own earthquake
safety website at www.celebratingeqsafety.com which provides information about what causes
earthquakes, why buildings fail and more about the structural engineering profession.
The Structural Engineers Association of California (www.seaoc.org) is a nonprofit organization
of nearly 4000 members dedicated to advancing the structural engineering profession, protecting
public safety in the built environment and serving the business and professional needs of the
For more information or an interview, contact Patricia Coate, Media Contact for SEAOC at
firstname.lastname@example.org or 415-309-2231, or Jim Amundson, SEAOC PR committee chair,
email@example.com or 619-232-4673. Ext 219.